EXP1-IT (63L) EX (CFE) HEPA:
Information:
ATEX 3rd Party Certified
0081 II 2 GD
Ex d IIA T3 Gb
Ex t IIIC T200°C Db IP6X
LCIE 03 ATEX 6297
GUARANTEED for the Safe Recovery of Combustible/Conductive
Dusts
ESD Safe Vacuum Systems for Hazardous Locations are designed
to prevent ignition hazards.
We use metal parts or Static Dissipative Powder Coating to prevent
Electrostatic Discharge (ESD)
- Immersion separator "Wet (Water) Mix" - Only meant to be used with water (no oil)
- Designed for the Recovery and INERTIZATION of
- Conductive and Explosive Dust, such as Aluminum, Magnesium, Zirconium and other commercial alloys, into a Liquid Immersion Bath
- Legally certified explosion proof/dust ignition proof
- Meets the requirements for a Liquid Precipitation Collector for metal dusts as outlined in NFPA 484
- Less than 10 ohms of resistivity
- Coalescing Filter Element (CFE) for moisture removal
- HEPA filter with an efficiency of 99.995% at 0.3 micron. Tested IEST-RP-CC001. H14 by MPPS method as per EN 1822 and OSHA compliant. All of our HEPA vacuum systems are aerosol leak tested before leaving our facility - included
- Electric
- Stainless steel SAE 304 interceptor tank
- Recovery capacity of 11 lb (5 kg) of dust into 6.5 gal. (25L) of water (no oil)
- Degassing vent allows gas to be evacuated automatically from the unit
- Portable and equipped with a single, or dual, static dissipative suction hose connector
- Detachable recovery tank (DT) for easy disposal of recovered materials
- Equipped with a liquid level indicator
- Tiger-Vac® carries a large inventory of shrouded sanders, grinders and dustless drill kits, along with a large suction port for maximum dust recovery
- OSHA Combustible Dust National Emphasis Program "NEP" NRTL approved. NRTL certified US/Canada for use in hazardous locations as defined in NFPA 70. Meets NFPA 484 Guidelines
- At Tiger-Vac® safety has no compromise